Before The First Use; How To Use - Di4 Vapore Stiro Healthy 3200 Manual De Instrucciones

If you use one adaptor make sure it can reach 16 A and is provided with earth socket.
In order to avoid that, under unfavorable mains conditions, phenomena like transient voltage drops or
lighting fluctuations can happen, it is recommended that the iron is connected to a power supply system
with a maximum impedance of 0,23 Ω. If necessary, the user can ask the public power supply company
for the system impedance at the interface point.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to t supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle.
Do not direct steam at people and animals.
Do not place the appliance under the tap to fill the water tank, or immerse it in water or other liquids.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device. Only an official technical support service centre may carry out repairs on this
product.
Proceed according to maintenance and cleaning section of this manual for cleaning
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.

BEFORE THE FIRST USE

Before using the steam iron, please ensure you read the user manual and understand all parts and
features of the steam iron. Be sure to remove any packaging material and labels before using for the
first time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on
clothes and there may be traces of dirt on the soleplate

HOW TO USE

HEATING
Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.
Press the "SET" button to set the appropriate temperature indicated in ironing instructions or in fabric
label.
SmartCare Programme
This programme sets an appropriate temperature, which is suitable for all fabrics that can be ironed.
The "SmartCare" programme does not apply to fabrics that cannot be ironed.
Please check the garment care label for details or try ironing on a part of the fabric not visible normally.
21