Canon PIXMATS300 Serie Guía De Inicio página 10

Loading Photo Paper
1
Open the paper support.
2
Slide the paper guide to the left.
3
a L oad photo paper against the right edge with
the print side facing up.
b S lide the paper guide to align it with the side
of the paper stack.
b
Smartphone Copy
You can copy documents by using the Canon PRINT Inkjet/SELPHY application software for
smartphones. To install the application, refer to step 1 on page 6. For the operation procedure, refer
to the Online Manual.
1
Load the document on the
printer.
8
4
5
a
2
Take a photo of the document
by using Canon PRINT Inkjet/
SELPHY.
Confirm that the Paper lamp that is lit matches
the paper size that is loaded.
LTR/
4" × 6"/10 × 15cm
A4/Hagaki/L
If the Paper lamp that lights does not match the
paper size, press the Paper Select button.
LTR/
4" × 6"/10 × 15cm
A4/Hagaki/L
Pull out the paper output tray and output tray
extension.
3
Send the image data to the
printer and print it.