Canon PIXMATS300 Serie Guía De Inicio página 6

5. Preparing for Connection
From here on, the procedure differs depending on the device used to connect to the printer.
First, after checking that the Wireless lamp is flashing 2 times at a time, proceed to the following operations.
In the following description, smartphones and tablet devices are collectively described as smartphone.
Wireless
Flashing
• To use the printer by connecting only to a computer or both to a computer and smartphone
"6-A. Connecting to Computer"
• To use the printer by connecting only to a smartphone
"6-B. Connecting to Smartphone" on page 6
6-A. Connecting to Computer
You need a connection setup for each computer. Proceed with the setup from step 1 for each computer.
1
Start the setup file for either method
Downloading from the Internet
a Open a web browser (
b Input the following URL and access the Canon
website.
c Select Set Up.
d Input the model name of your printer and click OK.
You can select a model name from the list.
4
or method
etc.) on your computer.
When the Wireless lamp does not flash, try again
from chapter 2 "Remove Tape and Turn on".
.
e Click Setup.
The procedures for Windows and macOS are shown
below. If you are using a computer with an OS other
than Windows or macOS, such as a Chrome OS, do
the setup according to the on-screen instructions.
f Click Download and download the setup file.
g Execute the downloaded file.
Proceed to step
continue.
Windows macOS
on the next page to