Operational Check - American Standard SpaLet Advanced Clean 2.5 Manual De Instrucciones

Operational Check

Follow the procedure below after the installation work has
been completed.
1. Insert the power plug into the outlet.
Confirm that the LED on the seat unit is lit.
Power
plug
2.Check the Back and Front
nozzle spray.
(1) Check the cleansing operation.
1) With your forearm resting on the toilet seat, press the
cleansing button.
The nozzle spray automatically stops two minutes
after the switch is turned on.
2) When the nozzle extends, cover the tip of the nozzle
with your hand to catch the spray.
3) Press the STOP button to stop the nozzle spray.
(2) Perform the same check using the
front nozzle spray function.
16 - EN -
Press here
on seat