Transit 4 Point Knob Hardware Package - Ki Mobility AXIOM CS Manual De Instrucciones Y Garantía

VI. HARDWARE AND INSTALLATION
B. Transit 4 Point Knob Hardware Package
Fig. 3
• Left and right corresponding seat and back mount brackets with hardware for quick
removal of the seating system from the chair.
• An optional tethered transit pin for added securement.
• Adjustable cane clamps that are to be installed to the chair frame permanently.
NOTE: Standard cane size is 1".
Assembly
NOTE: Use 3/16 and 5/32 T-Handles to install hardware. Do not overtighten screws.
A. 1/4-20 x 3/4 Button Head Screws & 1/4-20 Flat
Washers
C. 1/4-20 x 1/2 Socket Head Screws & 1/4-20 Nylon
Nuts
Knob Cane
Mount (2)
Fig. 4
Pinned
L-Bracket (2)
A
C
B. 1/4-20 x 1 1/4 Socket Head Screws
12
B