Removal And Reinstallation Of Seating From Frame - Ki Mobility AXIOM CS Manual De Instrucciones Y Garantía

VI. HARDWARE AND INSTALLATION
C. Removal and Reinstallation of Seating From Frame
When seat and back are installed as separate components.
1. Loosen all knobs on back. See Fig. 6 for the visual steps.
2. Remove optional tethered transit pin if applicable.
3. Lift back in an upward motion to clear all attaching hooks from hardware.
4. Remove seating.
5. Repeat steps for seat.
NOTE: To reinstall, go through the removal installation instructions in reverse.
Fig. 6
Backrest Installed
Loosen Knobs
Remove Pin (if present) Lift Backrest Hooks Up
14