Oki LD670 Guía De Usuario página 74

* How to initialize the paper layout
Pressing the FEED switch with the top cover open initializes the paper layout
information. After initialization is completed, load the paper you want to use
and then close the top cover. The printer feeds paper, automatically retrieves
paper information, and retains the paper layout information.
(1) Initialization
- Initialization initializes the paper layout information. You can use
initialization when changing the layout information while using the same
type of paper.
- Procedure: Press and hold down the FEED switch for a while. The POWER
and ERROR lamps will start blinking alternately. At this time, release the
FEED switch.
(2) Full initialization
- Full initialization initializes the paper type setting in addition to paper
layout information. Use it when you change the type of paper.
- Procedure: Press and hold down the FEED switch for a while. The POWER
and ERROR lamps will start blinking alternately. When you continue
holding down the FEED switch, the POWER and ERROR lamps will blink
simultaneously. At this time, release the FEED switch.
72