Replacing Paper - Oki LD670 Guía De Usuario

6-4. Replacing paper

The paper replacement procedure is as follows.
Automatic layout detection
<<Procedure>>
(1) Turn off the printer power, and open the top cover.
(2) Turn on the printer power.
(3) Load the paper that you want to use into the printer.
Leave the top cover open.
(4) Press and hold down the FEED switch. The POWER and ERROR
lamps blink alternately. Continue to hold down the FEED switch
until the POWER and ERROR lamps blink at the same time. At
this time, release the FEED switch.
(5) Close the top cover.
(6) The printer feeds the paper, automatically obtains paper
information, and saves the information.
Note: Automatic layout detection involves a paper feed of several
Updating the layout information
Re-specify paper information by following the procedure described in
Section 6-1-2, "Custom paper," or 6-2-2, "Setting detailed paper layout
information."
tens of centimeters. This is normal operation.
64