Method Of Setting Pne Sensor - Oki LD670 Guía De Usuario

14-6. Method of setting PNE sensor

Select PNE sensor position by each size of roll paper core diameter, then
pinch and fix the screw.
1 is default position. (The following chart is a position where the paper tube of
one-inch diameter is set.)
1 : Position for 1.0 inch core size
1.5 : Position for 1.5 inch core size
2 : Position for 2.0 inch core size
3 : Position for 3.0 inch core size
1
Screw
213
1.5 2
PNE sensor
3