Example (4) Changing The Feed At Power On - Oki LD670 Guía De Usuario

Example (4) Changing the Feed at Power On

Change from ENABLE to DISABLE
The procedure for this setting is as follows:
1. Before starting work for this setting, verify the following printer conditions:
(1) The power is turned off.
(2) Paper is loaded on the printer.
(3) The cover is closed.
2. Enter special mode.
Turn on the power switch on the right side of the printer while holding
down the FEED switch on the left part of the top cover.
Note: You must hold down the FEED switch until the printer starts printing.
Note: If you have passed the item that you want to select, quickly press the
FEED switch repeatedly until you return to the first item.
104