Conditions For Using Die-Cut Label Paper - Oki LD670 Guía De Usuario

3-4-3. Conditions for using die-cut label paper

When using die-cut label paper, confirm that the following conditions are
satisfied. When using die-cut label paper with black marks, confirm that
the conditions stated in Section 3-4-2, "Conditions for using black mark
paper," are also satisfied.
Printable side of paper
4.5 mm or more
4.5 mm or more
2  0.5 mm
2  0.5 mm
Paper feed direction
Base paper
Print area
Label
Note: The base paper's opacity (ISO) must be equal to or less than 70%.
20