Roll Paper Unit; Outline; Nomenclature - Oki LD670 Guía De Usuario

14-1. Outline

The wide roll paper unit is optional.
A maximum φ200-mm roll can be used.
Mount to the rear of the printer to use.

14-2. Nomenclature

Partition
Adjust position
according to paper
width.
Protruding
printer
connector

14. Roll Paper Unit

Cable clamps
Used to clamp the interface and AC adapter
cable.
PNE sensor cable
Connects to the printer.
204
Roll paper shaft
(enclosed)
※Roll paper shaft for
1.5 inches and two-inch
diameter is an option
sold separately.
PNE sensor