Fein WSG10-115T Manual Del Usuario página 15

3 41 01 121 21 0.book Seite 15 Montag, 22. August 2011 1:11 13
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(Figure 3).
Screw the auxiliary handle tightly onto
the left or right side of the power tool,
depending on the working method.
Mounting the guard (Figure 4)
WSG14-150T/WSG14-70ET.
Loosen the tightening screw.
Insert the clip of the wheel guard into
the groove on the power tool.
Turn the wheel guard to the required
working position and clamp the wheel
guard using the tightening screw.
Fig. 3
Auxiliary handle
Fig. 4
Clamping screw
Wheel guard
en
15