Fein WSG10-115T Manual Del Usuario página 21

3 41 01 121 21 0.book Seite 21 Montag, 22. August 2011 1:11 13
Stopping (Figure 12).
Let go of all the pressing surfaces. The
accessory begins to slow down.
Securing the work piece.
Secure the workpiece adequately. A
workpiece that is not properly secured
can, for example, cause the accessory to
jam and kick back, fall and cause other
hazards.
Using the cut-off wheel guard (FIgure 13).
For cut-off grinding operations, always
work with the cut-off wheel guard
mounted.
Before beginning to work, push the
cut-off wheel guard onto the already
mounted wheel guard for roughing.
Fig. 12
Fig. 13
Wheel guard
for roughing
en
21
Cut-off wheel
guard