Fein WSG10-115T Manual Del Usuario página 23

3 41 01 121 21 0.book Seite 23 Montag, 22. August 2011 1:11 13
Maintenance.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Service
Have maintenance carried out
WARNING
only through qualified person-
nel. Incorrectly mounted leads and components
can cause serious injuries. Have the required
service carried out only through a FEIN cus-
tomer service agent.
Cleaning
Prior to any cleaning or main-
WARNING
tenance, disconnect the power
tool from the power supply in order to avoid
accidents.
When using in environments
WARNING
with conductive dust in the air,
such as when working metals, this dust can
settle in the interior of the power tool. This can
impair the total insulation of the power tool.
Therefore, regularly blow out the interior of the
power tool from outside via the ventilation
openings with dry, oil-free compressed air;
always wear eye protection when doing this.
For additional protection, connect a residual
current device (RCD) on the line side.
Do not attempt to clean clogged or dirty
ventilation openings of the power tool
with pointed metal objects; use non-
metal tools or objects for this.
Do not use cleaning agents and solvents
that can cause damage to plastic parts.
These include: Gasoline, carbon-tetrachlo-
ride, chloric solvents, ammonia and domestic
cleaning agents that contain ammonia.
WSS14-125T: Unscrew the clamping unit by
hand to protect it from damage and dirt.
When the power tool's power cable is
damaged, it must be replaced by a quali-
fied person using a specially prepared power
cable, available from your FEIN customer
service agent.
If required, you can change the following parts
yourself: Application tools, auxiliary handle,
clamping unit or flanges, wheel guard
(WSG14-150T, WSG14-70ET).
Warranty and liability.
The warranty for the product is valid in
accordance with the legal regulations in the
country where it is marketed.
In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's
guarantee. For further details on this, please
contact your specialist dealer, your national
FEIN representative, or the FEIN customer
service center.
Environmental protection,
disposal.
Packaging, worn out power tools and acces-
sories should be sorted for environment-
friendly recycling. Further information can be
obtained from your specialist dealer.
en
23