Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 118
Deleting all transmitters
All the memorised codes can be deleted as follows:
Table "B4"
Deleting all transmitters
1.
Press the receiver button and hold it down
2.
Wait for the Led to light up, then wait for it to switch off
and then wait for it to flash 3 times
3.
Release the button exactly during the third flash
N.B.: if the procedure was performed correctly, the Led will flash 5 times after a few moments.

Technical characteristics

Receivers
Decoding
Transmitter compatibility
Frequency
Input impedance
Outputs
Sensitivity
Working temp.
Transmitters
Buttons
Power input
12Vdc Batt. 23A
Absorption
Frequency
Working temp.
Radiated power
SMXI
Rolling code
52 bit FLOR
FLOR, VERY VR
FLOR
VERY VR
1 – 2 - 4
2
6Vdc lithium batt.
10mA
10mA
SMXIS
Rolling code
64 bit SMILO
SMILO
433.92MHz
52ohm
4 (on connector SMXI)
better than 0.5µV
-10°C ÷ + 55°CC
FLO
VERY VE
1 – 2 - 4
2
12Vdc Batt. 23°
6Vdc lithium batt.
15mA
10mA
433.92MHz
-40°C ÷ + 85°C
100µW
Example
RX
x3
RX
x5
SMXIF
1024 FLO combinations
FLO, VERY VE
SMILO
2 - 4
12Vdc Batt. 23A
25mA
19
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido