Function; Parameters Setup - Baxtran STP Manual De Usuario

3. FUNCTION

TURNING ON
ZERO FUNCTION
MANUAL ACCUMULATION
CHECK ACCUMULATION
CLEAR ACCUMULATION

4. PARAMETERS SETUP

In weighing status, hold
calibration header on; or the data will lose.) P1~P13 parameters are available, press
and press the key to confirm.
Unit Selection kg o Lb
F1
*
F2
*
Not available for this model
Baud rate setup
F3 *
18
Press the key
mode..
Press the key
Please make sure the stabilization light is on when zero operation.
If obstruction occurs by more than 1 wireless indicator working at same time, you can open
both indicator and scale, change the number of transcoder inside with same number and
restart.
At weighing mode, press
TARE
light is on. At no-load status of the scale, press
At weighing mode, press
times is 99 and then it will return to 01). After then it will display the value of accumulation for
3s and then back to normal weighing mode by itself.
At weighing mode, press
after then back to normal weighing mode automatically.
At weighing mode, press
clear the current accumulation.
for more than 5s and entering setup mode. (P mode, all the setting in this mode should be recorded with the
: 1= kg (default)
*
: 2= Lb
*
: 1= 9600 (default)
*
: 2= 4800
*
: 3= 2400
*
: 4= 1200
*
along 1 second, the indicator performs self-checking and go into weighing
for zero return, indicator returns to zero within the zero range 2%FS.
to deduct displaying weight while it is positive and stabilization
it displays ADD-01, "01" means times of accumulation (the Max
it will display the times and the value of current accumulation,
Add--
it displays
MANUAL DE USUARIO STP
to deduct tare and then tare light is off.
and back to weighing mode which means
to switch, and press to select parameter
ES