Calibration; Error Indication - Baxtran STP Manual De Usuario

5. CALIBRATION

Turn on the crane scale first, then hold key
keys and the display shows [d

CALIBRATION

STEP OPERATION
d
1
P
2
FULL
3
noLoAd
4
5
AdLoAd
6

6. ERROR INDICATION

Err 1
1
Err 2
2
Err 3
3
Err 5
4
bAt-Lo
5
20
and press the key
*]
DISPLAY
Press to choose division value
(several times)
*
Press to choose decimal point
*
position (several times).
Setup F.S.
Zero point calibration:
Press when the stable light is
on.
Load standard weights
F.S. calibration: (Press
if the value to be input is same as F.S.
when stable light is on)
AD value is too small when calibration.
Zero point is out of range when calibration.
Zero point is out of range when power on
Weight input is 0 when full scale calibration
Indicator out of battery, please charge.
MANUAL DE USUARIO STP
until to watch 99999, in this moment set free the
EXPLANATION
Divisin value: 1,2,5,10,20,50
Press the key
Decimal point optional: "0","0.0","0.00","0.000",
Press to confirm.
Example: 0.00
Input F.S.:Press
to select the digit; press
input F.S..
Example: 30000
Assure there's no loading.
Input weight of standard weights loaded: Press
directly to choose the digit bit; press
digit. Until the input value is same as the loaded
weight and the digit bit is at the highest bit, press
to confirm when the stable light is on.
ES
to confirm. Example: 2
to choose the digit bit; press
to confirm the
to select the