Troubleshooting - JVC CU-VS100U Manual De Instrucciones

Troubleshooting

Before you request repairs, check the items in the table below once more.
If there is still a problem, contact the store where you purchased this product or your nearest JVC service outlet.
■ If the player is malfunctioning, reset the player.
1. Turn the player off by pressing and holding power (
2. Press the power ( ) to turn the player back on.
Problem
The player won't
turn on.
The player won't
work.
The screen
freezes during
SETUP.
The player or its
power cable is
warm.
There is no image
on the TV.
It takes a time to
start playing.
The image is
disrupted during
reverse or fast-
forward playback.
The TV switches
input automati-
cally when the
player is played.
The TV turns off
when this player
is turned off .
This player
functions when
the TV's remote
control is being
operated.
) on the player for at least 10 seconds.
● Ensure that you are using the special power cable provided and that it is connected cor-
rectly. (P.6)
● Press and hold power (
player automatically turns off .)
● If used for an extended period, the player and its power cable become warm. This is normal
and does not indicate a fault.
● If the player or power cable becomes abnormally hot, disconnect the power cable and con-
tact the store where you purchased this product or your nearest JVC service outlet.
● Connect the player to the TV. (P.6)
● On a TV equipped with A/V input jacks, switch to the external input for the connection with
the player.
● The content type is not supported by the player and is not recognized.
● Review the resolution setting. (P.13)
● Press and hold the player's power (
player. (The player automatically turns off .)
● It may take some more time to start playing long recorded movies or large sized images.
● The image may become disrupted during the change in playback speed when you switch
speeds. This is normal and does not indicate a fault.
● This is caused by the operation of the HDMI-CEC control function. To disable this function,
set "HDMI control" to "Off " in the SETUP menu. (P.13)
Solution
) on the player for at least 10 seconds to reset the player. (The
) and SKIP for at least 2 seconds to reset the
EN
FR
CA
中文
PT
15