Message Displayed - JVC CU-VS100U Manual De Instrucciones

Message displayed

Problem
This operation may cause the screen not to dis-
play. Do you want to continue?
Color system has changed. Do you want to
save these settings?
This operation may cause the screen not to dis-
play. Do you want to continue?
Video resolution has changed. Do you want to
save these settings?
Do you want to start copying?
Content with the same format was found at the
copy destination. The newly-copied content
may not be played with other devices if you
continue copying. Do you want to start copy-
ing?
The SD Card in Slot B cannot be recognized.
Do you want to format the card?
Do you want to cancel copying?
Copy Complete!
Copying has been cancelled.
Format complete.
No SD Card is inserted.
The SD Card in Slot A cannot be recognized.
The SD Card in Slot B is locked.
There is not enough memory space on the
card.
The number of folders exceeds the limit.
There is not any content to be copied.
Select the content to be copied.
Copy Error
Format Error
Formatting...
The content is not compatible.
CARD INSERTED
CARD EJECTED
16
● This is displayed when you change the Color System setting.
● This is displayed when you change the HDMI resolution.
● Select "Yes" to begin copying.
● There is an AVCHD, SD-Video or DCF folder on the copy destination SD
card in slot B. If you select "Yes", the content may be saved in another
folder. See page 12 for details.
● An SD card that has been formatted in something other than the FAT32
fi le system is loaded in slot B. If it is okay to purge the data in the SD card
and reformat it, select 'Yes'; if you do not want to purge the data, select 'No'.
Insert another SD card if you choose not to purge the data on the fi rst SD
card.
● Select "Yes" to cancel copying.
● Select "OK" to return to the normal screen.
● Insert an SD card into SD card slot A or B.
● An SD card that has been formatted in something other than the FAT32
fi le system is loaded in slot A. Insert an SD card that has been properly
formatted.
● Unlock the SD card in slot B.
● There is not enough free space on the SD card in slot B.
Insert a diff erent SD card.
● There are 100 or more folders in the "CU_VS100" folder on the SD card
in slot B. Using a computer or similar device, set the number of folders to
100 or less, or insert a diff erent SD card.
● Insert a diff erent SD card.
● No content has been selected for "Select copy". Select the content you
want to copy.
● Redo the copy procedure or insert a diff erent SD card.
● Processing will take a short time.
● This content cannot be played.
When you play the following content, press ENTER in your remote
controller and select OK. If you want to choose another content, press
STOP in your remote controller and go back to contents menu.
● Displayed when an SD card is inserted.
● Displayed when an SD card is removed.
● Indicates an action that cannot be performed.
Solution