Confi guring the Player Settings
1
Press SETUP to display the SETUP menu.
2
Use ▲/▼ to select the type of settings and then press ▶.
3
Use ▲/▼ to select a setting item and then press ENTER.
4
Use ▲/▼ to confi gure the setting and then press ENTER.
Type
Item
General
Language
Repeat*¹
HDMI control
Overlay Bitmap
Reset
Video
TV Screen*²
Color System
HDMI
Note
Some fi les may not be included in repeat playback.
*¹
Depending on the video being played, changing the setting may have no visible eff ect.
*²
The TV resolution is displayed. (480p is just an example.)
*³
When this content consists of Everio photo images, the date and time of the photo will be displayed in the
*⁴
lower right-hand side of the screen when the fi le is played back.
Setting
For specifying the language to be displayed for SETUP menu
screen and others. "English" is set as the default language.
(English / Français / Deutsch / Español / Italiano / Nederlands /
Português / Русский / 中文 )
Off
Repeat playback is disabled.
On
Plays all the fi les in a folder repeatedly.
• Repeat plays only fi les of the same type as the selected fi le.
• Linked repeat playback can also be used running from SD card
slot A to SD card slot B, but this only applies for movie fi les record-
ed in AVCHD format.
On/Off
See page 14.
On/Off
Turns AVCHD Overlay Bitmap*
Restores the settings in place when you purchased the player.
4:3/16:9
Sets the screen size to match that of the connected TV. (When the
TV screen size is fi xed, images are displayed using the TV's set-
tings regardless of the setting selected on the player.)
NTSC
Forcibly converts fi les to the NTSC system for playback.
PAL
Forcibly converts fi les to the PAL system for playback. This setting
should not normally be used.
480i/480p/
Displays images at the selected resolution.
720p/1080i/
1080p
Auto - 480p *³
Outputs the recommended TV resolution.
SETUP
General
Language
Repeat
Video
HDMI control
Overlay Bitmap
Reset
Details
4
display on and off .
EN
: English
: Off
FR
: On
: Off
CA
中文
PT
13