jbc RP 5100 Manual Del Usuario página 2

We appreciate the confidence you have shown in JBC by purchasing this
station. It has been manufactured with the highest standards of quality to
ensure reliable service. Before starting up the apparatus, we suggest you to
read through the following instructions carefully.
FEATURES
Station composition
RP 5100 230V 50 Hz
RP 5100 115V 60 Hz
- Control unit 230V/24V
- Control unit 115V/24V
- Soldering iron 50W
- Desoldering iron 75W
- Soldering stand US 1000
- Desoldering stand UD 1500 Ref. 0290150
- Set of tools and
replacement filters
- Tip removal device
- Instructions manual
Weight of packaged equipment: 3,8 kg
Besides the soldering and desoldering irons
supplied with this station, the control unit will also
take the 20W Ref. 3000000, 70W Ref. 3070000
and 60W Ref. 3020000 soldering irons, the latter
with solder feed system, at either of its two
connectors.
Technical data
The control unit contains the low-voltage supply
24V, via a current-isolation transformer. The
Ref. 5100200
electronic control system is divided into two
Ref. 5100100
separate circuits, one for the soldering iron
Ref. 5130200 and the other for the desoldering iron, each
Ref. 5130100 governed by a micro-controller. Antistatic
housing in accordance with CECC 00015
Ref. 3010000
Ref. 3040000 recommendations.
Ref. 0290100
1. Power supply:
Ref. 0965996
2. Temperature range from 50 to 400°C.
Ref. 0114108
3. Stores all programmed data.
Ref. 0965430
4. Five user-programmable functions.
5. Abides the CE standards for electrical
1
230V, 50Hz, 175W
115V, 60Hz, 175W
security, electromagnetical compatibility
and antistatic protection.
Equipotential connection is used to
protect the components against static
electricity discharges.
ENGLISH
(RP 5100 230V)
(RP 5100 115V)