Kohler K-304 Guía De Instalación Y Cuidado página 6

Stop
Assembly
1. Prepare the Valve
IMPORTANT! The internal components of the valve will only need
to be removed for back-to-back installations (reversed valve only) or
installations that require soldering of connections.
NOTE: Only valves with stops will include the stop assembly.
Installations Requiring Soldering
Remove the plaster guard (not shown).
Remove internal valve components as shown and set aside.
Back-to-Back Installations
Remove the plaster guard (not shown).
For the reversed valve, remove internal components as shown
and set aside. The stop assembly does not need to be removed if
soldering is not needed.
1110626-2-J 6 Kohler Co.