Sanus VML5 Manual De Instrucciones
Ocultar thumbs
Ver también para VML5:
- Manual de instrucciones (40 páginas) ,
- Manual del usario (44 páginas)
Manuales relacionados para Sanus VML5
Resumen de contenidos para Sanus VML5
- Página 1 VML 5 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video http://san.us/404...
- Página 2 Does your TV weigh more than 75 lb (34 kg) including accessories? No — Perfect! 75 lb (34 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your wall made of? Drywall with Solid concrete or...
- Página 3 STEP 1 Attach Bracket to TV Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 4 1-1 Select TV Screws 1-2 Spacers Hand thread screws into the threaded inserts on the back of your TV Spacers and screws are supplied to install your TV bracket. to determine which screw diameter (M4, M5, M6, or M8) to use. Determine your preference for spacer configuration when attaching your TV bracket.
- Página 5 1-3 Attach TV Brackets Center the TV brackets over your TV hole pattern as shown. Be sure to use the same holes and that the brackets are level. NOTE: Loosen the adjustment screws on TV brackets to extend the mounting holes over your TV hole pattern. Install using the spacer, screw and washer combination you selected for your TV.
- Página 6 Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. Sanus Magnetic Stud Finder Wall Plate Wall Plate...
- Página 7 Finder* located in your Welcome folder for more detailed operation of stud finder. Min. 406 mm (16 in.) Locate a nail/screw in the studs using the Sanus magnetic stud finder provided. Find the edges of the studs using the probe of the stud finder Mark the centers of the studs with pencil.
- Página 8 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
- Página 9 Partially install the top two lag bolts , leaving about 13 mm (1/2 in.) space from the wall. NOTE: This space allows you to remove the wall plate template and hang the wall plate onto the top lag bolts Remove the wall plate template ≈...
- Página 10 Hang the wall plate on the top lag bolts Install the bottom two lag bolts . Tighten all four lag bolts only until they are pulled firmly against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place.
- Página 11 NOTE: See Introducing Sanus Magnetic Stud Finder * located in your Welcome folder for more detailed operation of stud finder. Locate a nail/screw in the stud using the Sanus magnetic stud finder provided. Find the edges of the stud using the probe of the stud finder Mark the center of the stud with pencil.
- Página 12 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
- Página 13 Remove the wall plate template and insert two anchors into the outer top holes. CAUTION: Be sure the anchors are seated flush with the drywall surface. Partially install the top two lag bolts into the anchors , leaving about 13 mm (1/2 in.) space from the wall. NOTE: This space allows you to hang the wall plate onto the top lag bolts ≈...
- Página 14 Hang the wall plate on the top lag bolts Install the middle two lag bolts . Tighten all four lag bolts only until they are pulled firmly against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place.
- Página 15 Level the wall plate template and mark the hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill four pilot holes using a 10 mm (3/8 in.) diameter drill bit.
- Página 16 Remove the wall plate template and insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Partially install the top two lag bolts , leaving about 13 mm (1/2 in.) space from the wall. NOTE: This space allows you to hang the wall plate onto the top lag bolts ≈13 mm ( 1/2 in.)
- Página 17 Hang the wall plate on the top lag bolts. Install the bottom two lag bolts . Tighten all four lag bolts only until they are pulled firmly against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the wall plate from shifting out of place.
- Página 18 STEP 3 Attach TV to Wall Plate HEAVY ! You may need assistance with this step. Hook the TV/brackets onto the wall plate NOTE: The TV/brackets can be slid anywhere along the wall plate for optimal positioning of your TV. Rest the TV into place against the wall.
- Página 19 Manage Cables Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall until the kick stands fall into place. CAUTION: To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall. Temporarily rest the TV on the kick stands while assembling the cables on the TV.
- Página 20 Adjustments LEVEL To level your TV, turn the level adjustment screw on the top of either TV bracket to raise or lower that respective side of the TV. Raise Lower Level Adjustment Screw...
- Página 21 TV LATERAL SHIFT REMOVING THE TV HEAVY ! You may need HEAVY ! You may need assistance with this step. assistance with this step. Slide the TV left or right along the Disconnect all cables from the TV (see Manage Cables on PAGE 19). wall plate to reposition.
- Página 22 Features TV bracket expands to fi t TV Level hole patterns from 200 x 200 mm adjustments up to 400 x 400 mm create a worry-free installation Brackets adjust side to side within the wall plate for optimal positioning Kick Stands hold TV from wall to Locking mechanisms create room to attach cables for added security...
- Página 23 Dimensions 16.00 406.4 2.00 50.8 [mm] 2.47 5.00 62.8 127.0 21.30 541.1 15.75 400.0 0.91 1" POST INSTALL 7.87 23.0 HEIGHT ADJUST 200.0 7.87 200.0 15.75 400.0 18.72 475.5 6.37°...
-
Página 24: Listo Para Comenzar
¿Su televisor pesa más de 34 kg (75 lb), incluidos los accesorios? No — ¡Perfecto! 34 kg Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para (75 lb) encontrar un soporte compatible. - Página 25 ESPAÑOL PASO 1 Colocar las placas de sujeción en el televisor Ver página 3 Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
-
Página 26: Opción Para Montantes De Madera (Instalación De Doble Montante)
Se deben verificar las partes centrales de los pernos, no todas las paredes tienen una separación convencional de 406 mm (16") NOTA: Consulte la sección Presentación del detector magnético de bordes de montantes Sanus* que se encuentra en su carpeta de bienvenida para obtener más detalles sobre el funcionamiento del detector de bordes de montantes. - Página 27 Se debe verificar la parte central NOTA: Consulte la sección Presentación del detector magnético de bordes de montantes Sanus* que se encuentra en su carpeta de bienvenida para obtener más detalles sobre el funcionamiento del detector de bordes de montantes.
- Página 28 Nivele la plantilla de la placa mural y fíjela con cinta adhesiva en el lugar. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. IMPORTANTE : Asegúrese de marcar y perforar el centro del montante.
-
Página 29: Opción Para Hormigón Sólido O Bloques De Cemento
Nivele la plantilla de la placa mural y marque la ubicación de los orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cuatro orificios guía con una mecha de 10 mm (3/8") de diámetro. - Página 30 ESPAÑOL PASO 3 Fijar el televisor a la placa mural Ver página 18 ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. Cuelgue el módulo televisor-placas en la placa mural NOTA: El módulo televisor-placas se puede deslizar hacia cualquier parte junto con la placa mural para lograr un posicionamiento óptimo de su televisor.
-
Página 31: Descripción
ESPAÑOL Ajustes Ver página 20 NIVEL Para nivelar su televisor, gire el tornillo de ajuste de nivel en la parte superior de alguna de las placas de sujeción para levantar o bajar el lado respectivo del televisor. DESPLAZADOR LATERAL DEL TELEVISOR ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. - Página 32 ©2013 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.