Festo DNCI Instrucciones De Utilizacion página 21

DNCI
With direct fastening or if mounting accessories are used, in each case with
cylinder collar milling:
Select one of the fastening possibilities listed in the following table:
S
Double screwing with foot fastening
HNA in the threaded holes of the
cover screws
Fig. 2
The different product sizes have connector threads of the following design and
with the following tightening torques:
DNCI−...
Connector thread
Tightening torque [Nm]
Fig. 3
Tighten the fastening screws equally.
S
Festo DNCI 0907c English
Double screwing with foot fastening
FNC in the threaded holes of the
cover screws
32 40
M6 M6
4 5
50 63
M8 M8
8 8
21