Care And Maintenance - Festo DNCI Instrucciones De Utilizacion

DNCI
7 Operation
Warning
Uncontrolled moving parts can cause
injury to people in the vicinity of the
DNCI .
S Make sure that nobody can place his/
her hand in the positioning range of the
work load (e.g. by means of a protective
screen).
If the DNCI is protected correctly, it
should not be possible to gain access to
it until it has come to a complete stand.
S Make sure that no objects project into
the positioning range of the work load.
8

Care and maintenance

Do not adjust screws or threaded pins for which there is no direct request for
S
modification in these operating instructions.
In this way you will prevent damage to the cylinder at a later stage.
Cleaning
Clean the exterior of the DNCI with a soft cloth.
S
The following cleaning agents are permitted:
soap suds (max. + 60 °C)
petroleum ether
all non−abrasive cleaning agents.
26
Fig. 13
Festo DNCI 0907c English