Chapter 5 Storage; Preparing To Store Away For A Long Period Of Time - EMAK TN4500 Uso Y Mantenimiento

cHAPtEr 5 – StorAGE
dAnGEr
o When draining the engine fuel,
use a pan to collect it and avoid
spilling out.
o Before covering the machine
with a sheet, make sure that the
engine and the muffler are suffi-
ciently cold.
WArnInG
o Store the machine on a flat and
stable surface. If it's put away on
a downhill surface, use blocking
bars so that the machine cannot
move.
cAutIon
o Switch off the engine before
performing maintenance. Make
sure that hot components have
cooled off sufficiently.
o Remove any inflammable object
away from the working area befo-
re performing maintenance.
1. Carry out daily maintenance eve-
ry time you use the machine
o Within the same day of use,
wash the machine and dry it. Then
lubricate rotating and sliding parts
with oil.
o Clean the air filter properly.
o Check the starting rope and
remove grass or dirt stuck in the
protection grids.
cAutIon
o Pay attention when washing
the machine that water does not
go inside the air filter plug as this
could ruin it.
o Make sure that water does not
get into contact with the machi-
ne's electrical components as
these could get ruined.
2. Preparing to store away for a long
period of time
1. Put the machine in a dry and well-
ventilated place and make sure that
the transport box is lowered.
2. Smear rustproof oil, engine oil
or grease to those external parts
subject to corrosion.
3. For storing operations concerning
the engine, refer to the engine's "Use
and Maintenance" handbook.
25