About This Documentation; Documentation Validity; Required And Supplementary Documentation; Presentation Of Information - Aventics AV03/05 mit IO-Link Descripción De Sistema

1

About This Documentation

1.1

Documentation validity

This documentation applies to the AES series IO-Link interface. It applies to both the type A (3-wire)
switching and type B (5-wire, external actuator supply) interface.
The documentation is geared toward programmers, electrical engineers, service personnel, and
system owners.
This documentation contains important information on the safe and proper commissioning and
operation of the product and how to remedy simple malfunctions yourself. In addition to a
description of the interface, it also contains information on the configuration of the IO-Link interface.
1.2

Required and supplementary documentation

Only commission the product once you have obtained the following documentation and
understood and complied with its contents.
Table 1: Required and supplementary documentation
Documentation
System documentation
Documentation of the IO-Link-Master
configuration program
Assembly instructions for all current
components and the entire AV valve system
System description for electrically
connecting the IO-Link interface
All assembly instructions and system descriptions for the AES and AV series, as well as the
configuration files, can be found on the CD R412018133.
1.3

Presentation of information

To allow you to begin working with the product quickly and safely, uniform safety instructions,
symbols, terms, and abbreviations are used in this documentation. For better understanding, these
are explained in the following sections.
1.3.1

Safety instructions

This documentation contains safety instructions before any steps that involve a risk of personal
injury or damage to property. The measures described to avoid these hazards must be observed.
AVENTICS | AV03/05 with IO-Link | R412018145–BAL–001–AC
Document type
Operating
instructions
Software manual
Assembly
instructions
System description
About This Documentation
Comment
To be created by system owner
Scope of delivery of the master
manufacturer/controller manufacturer
Printed documentation
PDF file on CD
43