Selecting The Mode Of Operation - ROBBE POWER PEAK FN DUO POWER Manual Del Usaurio

POWER PEAK FUN DUO POWER
'DEC' button
'DEC' button
'DEC' button
4 x
'DEC' button

Selecting the mode of operation

Use the 'MODE' button to activate the desired operating mode: CHARGING, DISCHAR-
GING; DISC -> CHAR 1 TIME, DISC -> CHAR 3 TIME.
Operating instructions
If you wish to charge a LiPo battery, you have to
select the cell count (1 to 6) as well as the battery
type. The following table shows the relationship
'INC' button
between the cell count and the battery voltage for
LiPo packs.
'INC' button
'INC' button
4 x
'INC' button
Use the 'DEC' button to scroll through the availa-
ble battery types in the reverse order.
'MODE' button
'MODE' button
'MODE' button
'MODE' button
Cell count
1
2
3
4
5
6
Activating a charge process
Activating a discharge process (termi-
nation for NiCd and NiMH batteries:
around 0.8 V per cell)
Activating a combined discharge ->
charge process, one cycle
Activating a combined discharge ->
charge process, three cycles
29
Order No.
8468
Nom. battery voltage
3.7 Volts
7.4 Volts
11.1 Volts
14.8 Volts
18.5 Volts
22.2 Volts