Technical Details; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PLLL 16 A2 Traducción Del Manual De Instrucciones Original

Technical details

Rated voltage:
Nominal frequency:
Nominal power:
Soldering iron:
Nominal power:
Illuminated magnifying glass with third hand:
Lighting:
Magnification:
Ambient conditions:
Dimensions:
Stand (L x B):
Length gooseneck
(magnifying glass):
Length gooseneck
(third hand):
Magnifier diameter:
Spindle holder (Ø x L):
Weight:
PLLL 16 A2
230 V ~
50 Hz
30 W
30 W
16 LEDs
2x, 3.5 dioptres /
4x, 11.8 dioptres
-20 to +40°C
<95% (non-condensing)
200 x 200 mm
265 mm
250 mm
100 mm
10.5 x 82 mm /
19 x 82 mm
approx. 2 kg
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
GB │ MT │
35 ■