Switching The Microscope On / Off - Bresser 52-83100 Instrucciones De Uso

22. Total number of images
23. SD memory card inserted
24. Battery level
25. Zoom level
1. Inserting the Batteries
Open the battery compartment cover
1.
(Fig. B, 11).
Insert the batteries (4 x AAA). Ensure
2.
correct battery polarity (+ and –).
Close the battery compartment cover.
3.
2. Inserting the Memory Card*
Switch the microscope off.
1.
Slide the memory card* into the card slot,
2.
contacts first (Fig. B, 10), until it snaps into
place with a faint click.
The memory card* is released with a faint
3.
click by pressing it in again and releasing it.
It can then be removed from the slot.
Note:
If the "FULL" message appears on the LCD
monitor, the memory card* is full. Replace
the memory card* or copy all the data to
21
*not included in the product contents
your PC. You can then delete all the data on
the memory card* and use it again. Only SD
memory cards* will fit the microscope.
The USB hand held microscope supports
SD memory cards of up to 16 gigabytes.
If there's ever any problem with the legibility
of any such card (the USB hand held
microscope with USB memory card inserted
switches itself off and displays the message
„Goodbye") then format the SD memory card
using the formatting function of your PC and
try again.Note that all the data on the card are
deleted by doing so.The camera supports
both FAT16 and FAT32 formats.
3. Operation

3.1 Switching the Microscope on / off:

Keep the POWER button (Fig. A, 2)
1.
pressed until the start screen is displayed on
the LCD monitor (Fig. A, 1).
To switch the microscope off, hold the
2.
POWER button down until "Good Bye!"
appears on the LCD monitor. The display will
DE
GB
FR
CZ
ES
IT