CST/BERGER LM30 Manual De Instrucciones página 6

FEATURES (Fig. 1)
1. Laser Emitting Window (Plumb Beam)
3. "Y" Level Vial
5. "Y" Leveling Screw & Plumb Vial Leveling Screw
7. Plumb Vial
9. Laser Emitting Window (Level Beam)
11. Battery Door Screw
13. Base with two 5/8" - 11 Mounting Thread
CONTROL BUTTON OPERATION (
1. POWER/CONTROL BUTTON - LEDs indicate operation mode.
2. PRESS CONTROL BUTTON ONE TIME to turn unit on; rotation begins in
"FAST" Speed (approx. 600 RPM).
3. PRESS TWO TIMES for "SLOW" Speed (approx. 150 RPM).
4. PRESS THREE TIMES to "STOP" rotary head (laser remains lit).
5. Press FOUR TIMES to use Long Sweep.
6. Press FIVE TIMES to use Short Sweep.
7. Low Battery Indication Light.
8. Remote Control Window.
9. PRESS CONTROL BUTTON SIX TIMES to turn unit off (no LED's remain lit and the
laser is OFF).
CERTIFICATIONS
This laser complies with all applicable portions of title 21 of the Code of Federal
Regulations set by the Dept. of Health, Education, and Welfare, the Food and Drug
Administration, the Center for Devices, and the Bureau of Radiological Health. Complies
with 21CFR 1040.10 and 10040.11 except for devations pursuant to Laser notice No. 50, dated June
24, 2007
The LM30 has also been tested and complies with the CE certification requirements set forth in the
EC regulations 89/336/EEC and EN 61000-6-1 (EN50082-1), EN 61000-6-3 (EN50081-1)
and IEC 60-825-1.
6 • LM30 Rotary Laser
Fig.2
)
2. Rotary Head
4. "X" Level Vial
6. "X" Leveling Screw
8. Control Button
10. Trivet
12. Battery Door