Saeco Royal EXCLUSIVE SUP 015 Manual De Instrucciones Para El Uso Y Mantenimiento página 10

17
Activating the cup heater
Move the asterisk at the end of the line to the
menu item CUP HEATER. Press ENT to activate
this function.
The display shows:
"CUP HEATER
"ON
The keys allow you to change the set
options: on, off.
Selecting temperature
Move the asterisk at the end of the line to the
menu item TEMPERATURE using the keys
Press ENT to activate this item.
The display shows:
"TEMPERATURE
"MEDIUM
The keys allow you to change the set
options: minimum, low, medium, high, maxi-
mum.
Selecting the prebrewing
function
As soon as the coffee has been moistened, the
pump stops for a while. Then, the brewing cycle
continues.
Move the asterisk at the end of the line to the
menu item PRE-BREWING using the keys
. Press ENT to activate this function.
The display shows:
"PREBREWING
"ON
The keys allow you to change the set
options: on, off, long (in this case the pump
stops for a longer period).
SELECTING THE LANGUAGE
Selecting the pregrinding
function
By selecting the pre-grinding function, the ma-
chine grinds coffee every time the doser is
empty. So, a ground coffee portion is always
ready in the doser. This allows time saving in the
"
semi-professional domain.
"
Move the asterisk at the end of the line to the
menu item PREGRINDING using the keys
. Press ENT to activate this function.
The display shows:
"PREGRINDING
"OFF
. The keys allow you to change the set
options: on, off.
"
Total coffee
"
Move the asterisk at the end of the line to the
menu item TOTAL COFFEES using the keys
. Press ENT to activate the option.
The display shows:
"TOTAL COFFEE
" 1234...
and the total number of coffees dispensed by
the machine.
This figure cannot be changed.
To leave this menu, press ENT or ESC.
Descaling
Move the asterisk at the end of the line to the
"
menu item DESCALING using the keys
Press ENT to activate the item.
"
The display shows:
"DESCALING
On descaling see page 24.
18
In programming function, by pressing keys,
move the asterisk till the end of the line on the
menu SIGN. DESCAL. an confirm the selection
with ENT button.
The following message will be displayed:
By means of the same keys, it is possible to
modify the value; Yes, or no.
In the function
"
"
is selected without the display message Descale,
the following message will be displayed:
To enter the programming mode, press the Key
ENT.
Timer
"
The timer enables the automatic switching off of
"
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing.
If after a few seconds coffee is brewed again,
the timer is reset. If the value set is 0:00, the
timer function is not activated and the machine
does not switch off.
Move the asterisk at the end of the line to the
menu item TIMER by means of the keys
Press ENT to activate this item.
The display shows:
.
"
The keys allow you to set the time peri-
ods. Save by means of the ENT key.
If the set time has already passed, the display
shows:
and the machine switches off. If necessary, you
"RESET DESCALING "
can switch on the machine again by means of
"NO " the energy saving switch.
Rinsing cycle
This appliance is equipped with a rinsing
cycle program for the usual, daily and
"SIGNAL. DESCAL. "
weekly rinsing. If regularly used, this pro-
gram effectively eliminates the greasiness of
coffee in inaccessible parts and avoids
alterations in the taste of coffee.
Depending on the way the appliance is
used, it is advisable to rinse it every month
"QUANTITY WATER "
or after max. 250 cups of coffee. The
"NOT REACHED "
rinsing cycle lasts about 5 minutes, and it is
divided into 4 cycles, including the rinsing
with cold water. Each cycle is followed by
a short pause of about 40 seconds.
Never stop the rinsing cycle.
Important: before starting the rinsing
cycle, always fill completely the water tank
and put a capacious container (min. 1 litre)
under the coffee dispensing unit, which is
height-adjustable and can be removed for
cleaning.
The rinsing cycle needs about 1 litre of
water (including final rinsing). From time to
time, empty the water tank.
.
By using the keys
the menu item RINSING CYCLE. To enable
this menu item use the ENT key.
"STANDBY "
The following message appears on the
"AFTER 0:00"
display:
SELECTING THE LANGUAGE
"ENERGY "
"SAVING "
move the asterisk to
"RINSING CYCLE "