Cooling Without The Battery - "Battery Off; Locking The Cooler - Waeco CoolFreeze CF-32UP Instrucciones De Uso

CF-32UP.book Seite 40 Donnerstag, 16. Juli 2009 5:21 17
Using the cooler
✓ The display (fig. 3 5, page 3) switches on and shows the
current cooling temperature.
Note
I
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooler starts cooling the interior.
Note
I
If the first LED of the charging display flashes and a beeping tone
sounds, the internal battery is empty. In this case, operate you cool-
er with an external power source so that the internal battery can re-
charge.
If no external power supply is available, switch off the cooler by
turning the battery switch (fig. 4 2, page 4) to "BATTERY OFF".
7.3 Cooling without the battery – "BATTERY OFF"
If required, you can operate the cooler without the internal battery
(e.g. when the battery is broken, etc.).
➤ Set the battery switch (fig. 4 2, page 4) to "BATTERY OFF".
➤ Connect the cooler (see "Connecting the cooler" on page 37).
➤ Press the "ON/OFF" button (fig. 3 1, page 3) for one to
two seconds.
✓ The "POWER" LED lights up.
✓ The display (fig. 3 5, page 3) switches on and shows the
current cooling temperature.
Note
I
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooler starts cooling the interior.
7.4

Locking the cooler

➤ Close the lid.
➤ Press the lock (fig. 2 1, page 3) downward until it audibly
latches in place.
40