OHAUS TAJ602 Manual De Instrucciones página 6

EN-4
Data sent from the Interface is in standard ASCII format terminated with a [CRLF] (carriage return-
line feed). The output format is as follows:
[weight]
[space]
[unit]
[space]
[stability indicator]
[space]
[legend]
[CR]
[LF]
Output examples: (Note: * and _ indicate spaces)
*****192.21_g
*******0.01_g_?
*******0.01_g___ 00:00:00
*****176.30_g_?_00:00:15
*****192.08_g___00:00:30
*****192.21_g
*****207.80_g_TOTAL
USB INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands when with a [CR] or [CRLF].
Scout Pro and Traveler Commands
? print current mode
0A turn Auto-print off
SA Auto-print on, prints on stability
CA Continuous Auto-print
(n)A Auto-print on 1 to 3600 second intervals (n = 1 to 3600)
C perform span calibration
L perform linearity calibration
0M gram mode
1M ounce mode
2M troy ounce mode
3M pennyweight mode
4M parts counting mode
5M pound mode
T tare balance, same as pressing ON-ZERO
V print software version
(Esc)R reset balance to factory defaults
P same as pressing PRINT
LE print last error code, i.e. [Err 0]
0S print unstable data
10 characters (right justified)
1 character
5 characters max (left justified)
1 character
1 character "?" when unstable, blank when stable
1 character
10 character TOTAL, hh:mm:ss(time interval), etc.
1 character
1 character
- Manual, Continuous or On-Stable printing
- Interval Printing (example:15sec interval)
- Accumulate Mode (Manual printing only)
unstable reading
unstable reading
USB Interface