Batching - Ptg8 - Elcometer NDT PTG6 Guia Del Usuario

10 BATCHING - PTG8

The PTG8 can store 100,000 readings in up to 1,000 batches. The
following batch functions are available:
Batch/New Batch; Creates a new sequential or grid batch -

see Section 10.1 'Creating a New Batch'.
Batch/New Batch/Fixed Batch Size; Pre-define the number of

readings which are stored in a batch. The gauge will notify the
user when a batch is complete and ask if another batch is to be
opened. These batches are then linked when transferred to
ElcoMaster . This feature is only available in sequential
batching - see Section 10.1 'Creating a New Batch'.
Batch/Open Existing Batch; Open an existing batch.

Batch/Review Batch; Review the readings, statistics, batch

information, calibration information, limit information and a
graph of all readings - see Section 11 'Reviewing Batch Data'
on page en-23.
Batch/Copy Batch; Copy a batch including the batch header

information, calibration and limit information.
Batch/Edit Batch/Rename Batch; Rename an existing batch.

Batch/Edit Batch/Clear Batch; Clear all readings within a

batch - but leaving all batch header information.
Batch/Edit Batch/Delete Batch; Delete a single batch or all

batches entirely from the gauge.
Batch/Deleted Reading/Delete Without Tag; Delete the last

reading entirely.
Batch/Deleted Reading/Delete With Tag; Delete the last

reading but mark it as deleted in the batch memory.
10.1 CREATING A NEW BATCH
Users can create a sequential batch or a grid batch:
Sequential batching; list based storage of readings.

Grid batching; readings are taken and stored in a grid / table

format. The user defines the number of rows and columns and
the direction in which readings are taken and stored.
en-21
R
®
www.elcometer.com