KOBE Brillia Serie Instrucciones De Instalación Y Manual De Operación página 11

Hood Installation
19. Slide the hood to the opening where it will be installed.
20. Locate the screw holes (4) on each side of the insert.
Adjust the level of the hood casing support according to
the thickness of the base (1/2 thickness plywood
recommended – Refer to Figure 3).
21. Secure the hood using screws holes that are located in
front and back of unit (Screws provided) Figure 7
22. Make sure the hood casing support is secure before
releasing.
CAUTION
: MAKE SURE HOOD IS SECURE BEFORE
RELEASING.
Final Assembly
23. Install Baffle Filters. Insert the filters towards the
back of the unit and push up.
24. Make sure the Baffle Filters are secure before
releasing.
Figure 7
9