Transcend Auto Manual Del Usario página 2

Description of Transcend LCD
Programming Base Station
The Transcend LCD Programming Base Station (LCD) is a unique accessory to be used
along with the Transcend Auto™, Transcend EZEX™, and Transcend® Sleep Apnea
Therapy Starter System (PAP device). The LCD seats the PAP securely in the stand. A
keypad with three buttons facilitates control and the screen visually displays compliance
data. The LCD is powered by Somnetics-approved power supplies. The LCD and Patient
manual are included in the package contents. Report any missing items to your
homecare provider.
The LCD displays the following information to the patient:
Transcend Auto
• Minimum Pressure in cm
H20
• Maximum in cm H2O
• Starting Pressure in cm
H20
• Ramp Duration in minutes
• Ramp Pressure in cm H20
• EZEX Pressure Relief
• Apnea Hypopnea Index
(AHI)
• Leak in L/min
• Device hours in both
"Total Blower Hours" and
"Total Patient Hours"
• Device fault screen
• Save Screen
Note: The LCD will display a 15 second pressure average when in therapy mode.
See "Therapy Mode" section for more information.
Note: Total Blower Hours and Total Patient Hours are divided into two separate screens.
LCD PROGRAMMING BASE STATION PATIENT MANUAL
Transcend EZEX
• Therapy Pressure in cm
H20
• Ramp Duration in minutes
• Ramp Pressure in cm H20
• EZEX Pressure Relief
• Apnea Hypopnea Index
(AHI)
• Leak in L/min
• Device hours in both
"Total Blower Hours" and
"Total Patient Hours"
• Device fault screen
• Save Screen
Transcend
• Therapy Pressure in cm
H20
• Ramp Duration in minutes
• Ramp Pressure in cm H20
• Apnea Hypopnea Index
(AHI)
• Leak in L/min
• Device hours in both
"Total Blower Hours" and
"Total Patient Hours"
• Device fault screen
• Save Screen
• ENGLISH • PAGE 2