Maintenance; After Use; Maintenance Schedule; Battery Maintenance - Nilfisk BU800 Instrucciones De Uso

Ocultar thumbs Ver también para BU800:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
ENGLISH

MAINTENANCE

A A FTER USE
After working, before leaving the machine:
1
Store the machine in a clean and dry place, indoors only.
2
Park the machine on a level fl oor. Ensure once the machine is
left unattended it is secured against unintentional movement.
3
Turn the Key Switch (1) to the OFF position (O).
4
Remove the key from the machine to prevent unauthorized use
of the machine.
5
Perform the daily maintenance procedures (see the Mainte-
nance schedule).

MAINTENANCE SCHEDULE

Maintenance Item
Charge Batteries
Check/Replace Dust Bags
Check/Replace Skirt
Clean Pad
Lubrication
Check/Service Pad Motor Brushes
Service Drive Motor Brushes

BATTERY MAINTENANCE

Charge the batteries each time the machine is used for 1 hour or
longer, or whenever the Battery Meter reads in the red area.
To Charge the Batteries...
1 Remove cover.
2 Plug charger in.
3 Check the fl uid level in all battery cells after charging the batteries.
Add distilled water, if necessary, to bring the fl uid level up to the
bottom of the fi ller tubes.
CAUTION!
To avoid damage to fl oor surfaces, wipe water and acid
from the top of the batteries after charging.
CAUTION!
Acid can spill onto the fl oor if the batteries are over-
fi lled.
IMPORTANT
Motor damage resulting from failure to service carbon brushes is not
covered under warranty. See the Limited Warranty statement.
8 - FORM NO. 56091105 - BU800
Daily
Monthly
Yearly
x
x
x
x
x
x
x
SPECIFICATIONS
Model
Model Number
Power Supply
Motor, Pad
Motor Traction
Drive System
Pad
Pad Speed
Pad Pressure
Speed, Forward
Speed, Reverse
Vibration
Sound Level (dbA)
Drive Wheel
On-board Charger
-AC Input
Length
Width
Height
Burnishing Swath
Polishing Rate
Weight (w/o batteries)
Gross Vehical Weight (GVW)
Gradeability - Cleaning (max.)
BU800 51BT
56383526
36 volt
1.5 kW (2.0 hp) 55 amp
.37 kW (.5 hp) PM
Direct Drive
51cm (20")
1500 rpm
Automatic
0 - 73 m/min (0-240 ft/min)
0 - 52 m/min (0-170 ft/min)
<7.6 mm/s
68
4cmx20cm (1.62"x8.00")
Standard 36V, 21A
100-240V ~ 50/60Hz 12-6A
127cm (50 inches)
58cm (23 inches)
105cm (41.25 inches)
51cm (20 inch)
2230 sq. m/hr. (24,000 sq. ft/hr)
79 kg / 174 lbs.
233 kg / 515 lbs.
2%

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

51bt56383526

Tabla de contenido