Technical Specifications; Basic Component; Control; Fan Motor Assembly (Fma) - Carrier 50CO Manual Del Usaurio

11 - TECHNICAL SPECIFICATIONS

11.1 Basic component

11.1.1 Control

The units are equipped with an automatic control: CARRIER CCU Controller
EN
CARRIER CCU Controller
This is used to manage the unit and ensure it runs smoothly. It is built into the display.
It can be connected to control systems so that the device can be controlled remotely, or to allow for master/slave control with
several units.
For adjustment and configuration, refer to the corresponding manual (X 0037.03.2015).

11.1.2 Fan motor assembly (FMA)

EC motor (electronic communication) with "plug fan" type direct drive.
Thanks to their technology, these fans have low energy consumption.
Type of FMA control:
- With the CCU Controller
• W40 to W100: MODBUS control as the FMAs are equipped with a MODBUS card which allows the following information to be
communicated to the controls: rotation speed, current used and power input.
.
• W115 : progressive 0-10V control.
EN - 11 X0039,03.2015