QSC PLD Guia De Inicio Rapido página 2

Inputs
There are four female XLR connectors labeled 1 through 4 that provide the audio inputs to the PLD amplifi ers. A single input can be routed to one
or a combination of outputs. You can use from one to four of the inputs. The inputs are 10 kΩ balanced or unbalanced, with a selectable sensitivity
of either +4 or +14 dBu. There are four male XLR connectors in parallel with the four female connectors. The male XLRs are for daisy chaining to the
inputs of other amplifi ers.
1. Make sure your audio source devices are powered off.
EN
2. Connect the input source XLRs to the four female XLRs.
NOTE: The PLD Series has the capability of routing the inputs to different outputs. Be sure that the connections you make here
match the confi guration of the amplifi er.
TD-000351-00-D
— Figure 2 —
Balanced
Inputs
1
Ground
2
Positive
3
Negative
— Figure 3 —
(Figure 2)
2
Unbalanced
Inputs
2 1
1+3
Ground
3
2
Positive
— Figure 4 —
2 1
3