CEA RAINBOW 180 Manual De Instrucciones página 8

EN
ENGLISH
Introduction
Description
Technical data
Usage limits (IEC 60974-1)
How to lift up the machine
Open the packaging
Installation
Connection to the electrical supply
Usage norms
MMA electrode welding
TIG welding
Maintenance
The pointing out of any difficulties
and their elimination
Procedure for welder assembly and disassembly
Wiring diagram
Key to the electrical diagram
Colour key
Meaning of graphic symbols on machine
Meaning of graphic symbols on rating plate
Adjustment of INVERTER control card
Spare parts list
Ordering spare parts
Introduction
8
8
Thank you for purchasing one of our products. Please read in-
structions on use in this manual as well as the safety rules
9
given in the attached booklet and follow them carefully to get
the best performance from the plant and be sure that the parts
9
have the longest service life possible. In the interest of custom-
9
ers, you are recommended to have maintenance and, where
necessary, repairs carried out by the workshops of our service
9
organisation, since they have suitable equipment and specially
trained personnel available. All our machinery and systems are
9
subject to continual development. We must therefore reserve
9
the right to modify their construction and properties.
10
Description
10
RAINBOW 180 is the latest evolution in inverter technology
11
generators for welding. The most advanced materials and com-
ponents have been used to design and produce it such as:
12
• Main planar transformer with extremely low load loss.
• Electronic auxiliary feeder.
12
• Voltage doubler ensuring precision striking, constant arc and
very low electrical input from the main supply by the welder.
12
• Extremely high frequency power INVERTER with very lat-
est type of IGBT to reduce switching losses to a minimum.
68
• The inverter resists ample current variations (MAX 290V) and
69
can be utilized with very long electric cables (MAX 100 m).
• High electric efficiency (> 0,8).
69
• Selector with 3 weld procedures:
- Basic electrodes with "Hot Start" and "Arc Force" device.
72
- Stainless steel electrodes with special characteristics for
74
a soft arc.
- TIG welding with thermal controlled (TCS) "Lift" type strik-
76
ing reducing tungsten inclusions to a minimum and allow-
ing to also strike on sharp edges.
77-79
• The generator also conforms to all European Union stand-
80
ards and directives in force.
Model
Single-phase power supply 50/60 Hz
Mains supply: Z
max
Power input @ I Max
2
Delayed fuse (I @ 100%)
2
Power factor / cosφ
Maximum efficiency degree
Open circuit voltage (max)
Current range
Duty cycle @ 100% (40°C)
Duty cycle @ 60% (40°C)
Duty cycle @ 20% (40°C)
Usable electrodes
Standards
Insulation class
Protection class
Dimensions
Weight
(*) Mains supply Z
according to the EN/IEC 61000-3-11 standard.
WARNING: This equipment does not comply with EN/IEC 61000-3-12.
If it is connected to a public low voltage system, it is the responsibil-
ity of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment
may be connected.
8
(*)
kVA
Ø mm
mm
: maximum impedance value allowed for the grid
max
Table 1
RAINBOW 180
V 230
Ω 0,19
11,3
A 20
0,59 / 0,99
η 0,74
V 88
A 5 ÷ 180
A 110
A 130
A 180
1,6 ÷ 4
IEC 60974-1
IEC 60974-10
IP 23 S
F
390-300-135
kg 6