Safety Warnings For Multi Tool - Flex FX4111 Manual Del Operador

Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring. Contact with a "live" wire will make
exposed metal parts of the tool "live" could give
the operator an electric shock.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive.
Example: Some dusts are regarded as
carcinogenic. Wear a dust mask and work with
dust/chip extraction when connectable.

SAFETY WARNINGS FOR MULTI TOOL

Use the machine only for dry sanding.
Penetration of water into the machine increases
the risk of an electric shock.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Wear protective gloves when changing
cutting tools. Cutting tools become hot after
prolonged usage.
-5-