Additional Handsets And Base Stations; Registering An Additional Handset - Topcom BUTLER OUTDOOR 2010 TWIN Guía Del Usuario Abreviada

Butler Outdoor 2010 - Twin - Triple
5.2 Save a new entry in the phone book by on-hook
dial mode
When you enter a telephone number is standby, and you press
afterwards the menu key
direct into the phonebook:
1. In standby enter the telephone number you want to store.
2. Press .
17
• 'ENTER NAME' appears in the display. Enter the name using
the alphanumeric keys.
3. Press and edit if necessary the telephone number.
17
4. Press to store the entry in the phonebook or press
17
ESC to cancel without saving the entry.
3
5.3 Finding and calling a number in the phone book
1. Press .
16
2. Enter the initial letters of the name using the alphanumeric
keys.
• The first name in the list with these letters appears in the
display.
4 15
3. Press or repeatedly to scroll through the other
numbers in the phone book.
4. Call the subscriber found: the desired number is highlighted.
Press .
14
6 Line settings
6.1 Set country
There are various country depending settings and by setting the
country these parameters are set correspondingly. Each
parameter can be set separately also. Some settings like dial
you can store the number
17
mode cannot be set if there are no different options in the set
country.
To set the country version:
1. Press .
17
4 15
2. Press or repeatedly, select 'LINE SETTINGS'.
3. Press to confirm.
17
4 15
4. Press or repeatedly, select 'COUNTRY'
5. Press to confirm.
17
6. Press 4 or 15 repeatedly to select the country and
press to confirm.
17
7. Press again to confirm.
17
7

Additional handsets and base stations

Up to 5 handsets can be registered to one base station. Additional
handset must be registered to the base unit before use. Handsets
of a bundled model are already registered to the base.
You can also register handsets of the Ultra range (like
the Ultra S1200C)!
7.1

Registering an additional handset

This is only necessary if you have de-registered a
handset or bought a new separate handset. You don't
have to register handsets of a bundle!
Hold down the paging key
5 seconds .
Registration mode on the base station is now activated for approx.
1 minutes. You must perform the following steps to register a
handset:
1. Press .
17
4 15
2. Press or repeatedly, select 'REGISTRATION'.
Line settings
19 on the base station for more than
11