Switching The Handset On/Off; Making Calls - Topcom BUTLER OUTDOOR 2010 TWIN Guía Del Usuario Abreviada

Butler Outdoor 2010 - Twin - Triple
4 Handset - settings and operation
The steps below show the key and display symbols and
the position numbers on the device overview.
Possible danger due to faults in the device!
Follow the safety notes.
4.1 Powering up (Set up mode)
At the first insertion of the battery, activation of the handset or after
a reset operation, the handset shall enter the set up mode. The
user should select the country for various country dependent
settings:
1. 'WELCOME' is shown for the first seconds followed by the
country setting menu. Press
2. 'Country' is shown on the display.
4 15
3. Use or to select the country.
4. Press to confirm.
17
5. Press again to confirm or press the escape key
17
ESC to go back.
3
4 15
6. Use or to select the language
7. Press to confirm.
17
8. Enter the date and press
9. Enter the time and press
4.2

Switching the handset on/off

1. Press the on/off key
2. To switch off the handset, hold down the on/off key
for more than 5 seconds until the device switches off.
to confirm.
17
to confirm.
17
to confirm.
17
6 until the display turn on.
4.3 Menu language selection
The telephone has 14 menu languages, to set the language,
proceed as follows:
1. Press
17
2. Press 4 or
3. Press
17
4
4. Press or
5. Press
17
• The language setting appears in the display
4
6. Press or
• Press
17
4.4

Making calls

4.4.1 External calls
1. Press 14 .
• The call symbol
2. When you hear the dialling tone, dial the telephone number
you want.
• The number appears in the display and is dialled.
3. To end the call, press
replace the handset on the base station or charging station.
4.4.2 Call preparation
1. Enter the telephone number you want to call.
2. To correct the number, press ESC
3. Press 14 .
6
• The call symbol
• The telephone number is automatically dialled.
4. To end the call, press
replace the handset on the base station or charging station.
Handset - settings and operation
.
15
repeatedly, select 'HS SETTINGS'.
to confirm.
15
repeatedly, select 'LANGUAGE'.
to confirm.
15
repeatedly, select the desired language.
to confirm.
appears in the display.
or (if auto hang-up is set on)
6
3 .
appears in the display.
or (if auto hang-up is set on)
6
9