General Information - WIKA R5502 Manual De Instrucciones

1. General information

1. General information
The bimetal thermometers described in the operating instructions
■
have been designed and manufactured using state-of-the-art
GB
technology. All components are subject to stringent quality and
environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on
■
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
Observe the local accident prevention regulations and general
■
safety regulations, in effect for the instrument's range of use.
The operating instructions are part of the instrument and must
■
be kept in the immediate vicinity of the instrument and readily
accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions, prior to beginning any work.
The manufacturers liability is void in the case of any damage
■
caused by using the product contrary to its intended use,
non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised
modifications to the instrument.
The general terms and conditions contained in the sales
■
documentation shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
4
www.wika.de / www.wika.com
TM 53.01, TM 54.01, TM 55.01
WIKA operating instructions models 53, 54, 55 (ATEX)