Troubleshooting; Changing The Bulb - Siemens S18IW Serie Instrucciones Para La Operación Y Cuidado

Troubleshooting

Fault
Appliance has no cooling
capacity. Interior light does not
function. The display does not
illuminate.
The refrigerating unit switches
on more and more frequently
and for longer.
The temperature in the both
compartment is too cold.
The interior light does not
function.

Changing the bulb

m
WARNING
To avoid electrical shock which
can cause death or severe
personal injury, disconnect power
to appliance before making
repairs.
After making repairs, reconnect
power.
Switch off the appliance with
the power button! Pull out the
mains plug or switch off the
fuse.
Interior light
(Top compartment)
m
CAUTION
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen
bulb, always hold with a soft cloth.
Possible cause:
Power failure; the fuse has actuated;
the mains plug has not been inserted
properly.
Appliance door opened frequently.
The ventilation openings have been
covered.
Temperature has been set too low.
The bulb is defective.
Light switch is sticking.
Halogen bulb type:
m
20 W/12 V/socket G4
Release the cover and remove
from the clip.
Pull out the defective halogen
bulb.
m
Remedial action
Check that the power is on. The fuse must
be switched on. Check that the mains
plug is plugged in.
Do not open the door unnecessarily.
Remove obstacles and dirt.
Select a warmer temperature (see "Setting
the temperature")
Change the bulb (see "Changing the
bulb").
Check whether it can be moved.
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.
Attach the cover and connect to
the clip.
LED Presenter light
(Bottom compartment)
A new LED is available from our
Customer Service.
15