Technical Data; General Warnings; Specific Use - Rupes BA215N Instrucciones De Uso Y Manutención

TECHNICAL DATA

TYPE
PROTECTION CLASS
OPERATING VOLTAGE
ABSORBED CURRENT
ABSORBED POWER
ROTATION RPM
WHEEL DIAMETER mm
WHEEL SPINDLE THREAD
WHEEL SPINDLE STOP
WEIGHT Kg

GENERAL WARNINGS

SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the "SAFETY INSTRUCTION" booklet which forms an integral part
of these documents; the operating instructions indicate the addi-
tional information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the
power supply disconnected.
Before starting the tool, ensure that it is held tightly and not in con-
tact with the work surface.
The tool must always be used with the protective shield mounted.
The abrasive wheel must be correctly mounted and tightened.
Make sure that the sparks caused during work do not create dan-
ger by hitting people or inflammable substances.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the
processed work material.
During tool use pieces of the wheel of work material may break off
causing serious injuries to people or things: remember to always
8
BA215N
II
230 V-50 Hz
4,6 A
950 W
10.000
115
M 14
YES
1,8
use all personal protection devices (such as gloves, headphones,
goggles, etc.) according to laws in force to prevent or reduce
accident probability.
Warning! the appliance continues to work for a few seconds after
it has been switched off!

SPECIFIC USE

Before use make sure that the wheels or cutters operating charac-
teristics are compatible with those of the machine and that they
are not broken or worn.
Make sure that the wheels or cutters are assembled, handled and
stored with care according to the manufacturer's indications.
Do not use and adapter system for cutters with tangs other than
those specified.
Do not use the wheel cutting edge as grinder.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any dama-
ges or accidents.
ENGLISH
8
BA225N
II
230 V-50 Hz
4,6 A
950 W
8.500
125
M 14
YES
1,8