Preface; Notices; Description; Product Marking - Nederman TAV 50 Manual De Instrucciones

1

Preface

This manual is for the correct installation, use and maintenance of this product. Read it carefully
before using this product or carrying out maintenance. Replace the manual immediately if lost.
This product has been designed to meet the requirements of relevant EC directives. To maintain
this status, all installation, repair and maintenance work for this product is to be carried out by
qualified personnel using only original spare parts. Contact the nearest authorized distributor or
Nederman for advice on technical service and obtaining spare parts.
Nederman continuously improves its products' design and efficiency through modifications,
and reserves the right to do so without introducing these improvements to previously supplied
products. Nederman also reserve the right to, without previous notice, modify data and
equipment as well as operating and maintenance instructions.
2

Notices

This document contains important information that is presented either as a warning, caution or
note. See the following examples:
WARNING! Risk of personal injury.
Warnings indicate a potential hazard to the health and safety of personnel, and how that hazard
may be avoided.
CAUTION! Risk of equipment damage.
Cautions indicate a potential hazard to the product but not to personnel, and how that hazard
may be avoided.
NOTE! Notes contain other information that is important for personnel.
3

Description

3.1

Product marking

The following products are not ATEX-classified and are only marked with the CE label:
•
TAV 50 MA (see Description ATEX-products)
•
TAV 50 MV-W
•
TAV 50 MV 24V AC/DC
•
TAV 50 FV/MV 24V AC/DC
The following products are ATEX-classified and are marked according to the description:
•
TAV 50 PC
•
TAV 50 FV
•
TAV 50 MV 115V AC, 230V AC, 24V DC
•
TAV 50 FV/MV 115V AC, 230V AC, 24V DC
II 3D c T=130 oC
Vacuum Valve TAV 50 EN
15