Local Settings - EdilKamin MAXIMA 14 Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para MAXIMA 14:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 133

LOCAL SETTINGS

To access the local settings menu, press the
In this menu, you can confi gure the settings for the local inter-
face for communication with the boiler.
Each group of settings has its own tab.
Data/time setting tab
On this tab, you can confi gure the format for displaying the
date and time.
Select to display
the time slots
Select to display
the date
Select to enable
programming of
time slots
Tab for setting the temperature measured by the local sen-
sor
In this tab, you can confi gure how room temperature is meas-
ured through the temperature sensor on the user panel. Select
the item you want to change (the control will be highlighted),
then press the plus/minus buttons to change the value.
Adjust
temperature
reading by
adding an
offset value
Defi nes the
interval of time
between the
temperature
measurements
Tab for setting the management of the TFT display
(Thin Film Transistor)
In this tab, you can confi gure several management modes of the
TFT display such as the inactivity time after which the back-
lighting is turned off and the time the touch control is blocked
for when cleaning the display. In addition, you can block the
panel to allow cleaning of the display.
To change a parameter, select it and then press the plus/minus
buttons.
INSTRUCTIONS FOR USE
.
Select the date
display format
Confi rms the
changes and
exits the menu
Buttons for
increasing/
decreasing
the selected
parameter
Confi rms the
changes and
exits the menu
- 68
To clean the display, press the Clean Display button. The mes-
sage Start Cleaning will be displayed and access to all func-
tions will be blocked for the time indicated for Clean Display
Time.
Set the time to wait in
the absence of activ-
ity before turning off
the backlighting
Set the time the
touch control is
locked to allow clean-
ing of the display
If selected, the keys
strings are shown in
black instead of white
Tab for setting the management of the buzzer
In this tab, you can confi gure several ways for managing the
buzzer in the user panel.
Select to turn
on the buzzer
confi rmation
sound when-
ever you press
a button on the
user panel
Tab that displays the fi rmware version
In this tab, you can check the fi rmware version installed on the
user panel.
Displays the ver-
sion of the program
update
-
Buttons for in-
creasing/decreas-
ing the selected
parameter
Blocks the touch con-
trol to allow cleaning
of the display
Confi rms the
changes and exits
the menu
Confi rms the
changes and
exits the menu
Displays the
program ver-
sion installed
Displays the
release date of the
program installed
Exits the menu

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Maxima 24

Tabla de contenido